UV Resin Curing Cabinet | Final Code, Schematic, Bill Of Materials and Demo

Here’s a demo of the finished system:

In the end, it all turned out really well. Painting it white and using a white print stand was a good insight, the light reflects around the box pretty well for how few LEDs are in use.

The software flow chart has changed slightly. I removed the speaker as it wasn’t loud enough and added software debouching for the pushbutton interrupt service routine. Here’s that most recent version:


The interesting parts of the code are the cookResin function as well as the main loop of the Arduino:

Again, this all should all be explained by the flow chart. The full source can be found at the bottom of this post.

The circuit schematic hasn’t changed at all since this post, here’s a fritzing of what’s going on:

Super simple, basically a screen and a button. The parts to make this are here:

Assembly is super straight forward, if you’re trying to build one and have any questions, let me know!

All of the files necessary to make this project can be found here.

Thanks for reading!

Hey! This post was written a long time ago, but I'm leaving it up on the off-chance it may help someone. Proceed with caution. It may not be a good idea to blindly integrate this code or work into your project, but instead use it as a starting point.

1 Comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.