So first we need to make sure I can output video files from a usb source.
I’ll be using “usbmount” and omxplayer, to get these packages make sure you’re pi’s setup correctly and run the following commands:
Note: make sure no storage devices are plugged into the usb port when you install “usbmount”
|
1 2 |
sudo apt-get install usbmount sudo apt-get install omxplayer |
Once those are installed you can start trying to play videos off of the usb drive (eventually the thumb drive will be replaced with a large hdd
I’ll be using filezilla to transfer to and from the pi.
Check out the video below to see omxplayer in action:
Edit: The upload failed and I forgot to check on it. Come back soon for the video.
I’m choosing to debug my Pi over composite. The reason being is because I’m going to be working a lot with video outputs, and I don’t have a second hdmi ready monitor. I’m going to be using the EasyCAP usb video capture card. This will also give me the ability to record what i’m seeing as well. This 100% better / much more efficient than buying a second monitor and filming on it. Of course when this is ready for implementation, it will be plugged into a television with HDMI so the picture will be amazing.